Do you have a question about the MOJIX STAR3000 and is the answer not in the manual?
Explains the structure and content of the manual, covering system overview, installation, and configuration.
Identifies the target users for this guide, focusing on professionals responsible for STAR 3000 system installation and operation.
Defines key terms and acronyms used throughout the STAR 3000 User Manual for clarity and understanding.
Details the main hardware components of the STAR 3000 system, including STAR Receivers, eNodes, and Master Controllers.
Illustrates and describes the physical connection ports and interfaces on the STAR unit for system integration.
Depicts the network layout and connections for a wired STAR system configuration, showing component interdependencies.
Illustrates the network architecture for a wireless STAR system, including wireless eNode and MCON connections.
Provides step-by-step guidance and recommendations for safely mounting and installing the STAR Receiver unit.
Details the procedure and hardware requirements for mounting the STAR system's power supply unit to a wall.
Lists the technical specifications, connectors, and operating parameters for the Mojix eNode transmitters.
Explains the concept of signal insertion loss in coaxial cables and its impact on system performance.
Outlines the technical specifications, connectors, and operating capabilities of the eMux module.
Describes the method for assigning unique addresses to eNodes and eXpanders for system identification and communication.
Introduces the GPIO unit, its function as an interface for sensors and actuators, and its terminal blocks.
Details the wiring and pinout configurations for connecting sensors and actuators to the GPIO unit via its terminal block.
Explains the redundancy features of the Master Controller (MCON) hardware for high availability and fault tolerance.
Provides instructions for establishing an initial network connection to the Master Controller (MCON) using default IP settings.
Guides users through modifying the network configuration of the MCON via its web interface for optimal connectivity.
Outlines methods for configuring network settings for the STAR 3000 system using terminal sessions or internet browsers.
| Brand | MOJIX |
|---|---|
| Model | STAR3000 |
| Category | Microphone system |
| Language | English |