STAR™ 3000 / eNode3000 User Manual
www.mojix.com
(877) 886-6549
1 Welcome to the STAR System
The Mojix STAR 3000 system is a single network element at the enterprise edge. Based on
Mojix's innovative distributed architecture, a single system consists of one or more STAR units
managing up to 512 low-cost Mojix eNode transmitters. Mojix eNodes provide energy to all
passive RFID tags within their specified interrogation spaces, while the centralized, high-
sensitivity Mojix STAR reads the resulting tag signals from across the system's potentially vast
coverage area of more than 250,000 sq. feet (24,000 sq. meters).
1.1 How This Guide is Organized
1.1.1 Overview
This guide covers complete information about the use and installation of the Mojix STAR 3000
system and how it is utilized with related hardware. It explains how to install the system’s
components as well as providing detailed configuration, installation, and deployment instructions
that can be utilized for your company’s specific requirements.
The following topics are outlined in this guide:
• STAR 3000 System Overview
• STAR Receiver Installation
• STAR Power Supply Installation
• eNode Installation
• eMux Installation
• eXpander Installation
• GPIO Installation
• Master Controller Installation
• System Network Setup
• MCON Configuration
• FCC Notice, STAR 3000 and eNode
• FCC Notice, eMux
1.2.1 Intended Audience
The information in this Guide is intended to be used by hiring professionals whom are
responsible for installing and utilizing the STAR 3000 System and its related software/hardware
components.
To Next Page