Description
14 0112-0115 F
Ref
A reading of buffer, water, or air taken in the cuvette that is used as I
0
to calculate Absorbance or % Transmittance. If no reference reading is
taken, the instrument uses the I
0
values stored in the NVRAM (non-
volatile memory) of the instrument.
This key is disabled during a computer-controlled run.
Read Cuvette
Initiates the sample reading of the cuvette.
This key is disabled during a computer-controlled run.
Mode
A toggle switch used to display cuvette data as percent transmittance
(%T), absorbance (A), relative fluorescence units (RFU), or relative
luminescence units (RLU).
Drawer
The key opens and closes (toggles) the microplate drawer.
To Next Page
Loading...
Need help?
General
