0112-0115 F 33
3
Installation
WARNING! Always make sure the power switch on the
instrument is in the OFF position and remove the power cord
from the back of the instrument prior to any installation or
relocation of the instrument.
WARNING! Do not operate the instrument in an environment
where potentially damaging liquids or gases are present.
CAUTION! Do not operate the instrument in a cold room with a
temperature below 15°C.
CAUTION! Do not touch or loosen any screws or parts other than those
specifically designated in the instructions. Doing so might cause
misalignment and voids the instrument warranty.
To Next Page
Loading...
Need help?
General
