Drill guide
Drill guide for Direct mounting of rail in concrete Ø
8,0mm, and Drill guide for End stops Ø 11mm
Article no.
1109999 Drill guide Ø8 mm for RH 62 DC
1109998 Drill guide Ø11 mm for endstop
Multibolt M10
Used for all connections with brackets into rail
profile.
Article no.
2520221 Multibolt kit
T-Profile washer
Used for direct mounting and for all end stops
Article no.
110 93 07 T-Profile washer MRS
Shims
Used for support to level brackets.
Article no.
110 9312 Shims 0,5 for MRS
110 9313 Shims 1,0 for MRS
110 9314 Shims 2,0 for MRS
Joint set – Washer and sprints.
Used for joining rails of same profile in straight
rails or curve rail system.
Article no.
110 9350 Joint set for MRS
Mounting plate for mounting of rail switch.
Article no.
1109090 Rail Mounting plate Assy Switch
MRS
4.8 Installation tools
To Next Page
Loading...
