In order to design a lifting solution, create a speci-
fication, order the parts and install the overhead
systems You need following documents apart
from this Handbook:
- Molift Pricelist
- Molift Product catalogue
- Site survey
- Installation instructions
The Handbook is divided into nine main chapters.
Chapter 1 – Molift Rail System (MRS)
Introduction of Molift Rail System. General terms
and a description how to use this handbook.
Chapter 2 - Installation criteria – Principles
Description of the principles for installing a Molift
Rail System, Site survey process and how to handle
different constructions material in buildings.
Chapter 3 –System Overview
Overview of possible system configuration and
combinations of MRS.
Chapter 4 – Component Overview
This chapter describes the MRS products and
which components are available for different
design solutions.
Chapter 5 - Design Conditions
This chapter describes the design conditions, limi-
tations and possibilities how to combine the MRS
products to create a sufficient and safe Molift
Overhead System.
Chapter 6 - Installation methods
This Chapter describes work flow and tools for
survey and installation process.
Chapter 7 - Final Installation Procedure
This Chapter describes procedure for the final test-
ing and certification of installed rail system.
Chapter 8 - System combinations – Examples
This Chapter describes a few of the most common
design solutions of Molift Rail System. Shows com-
bination possibilities, measurements and examples
of specifications.
Chapter 9 - Installation instructions
This Chapter describe list of available Specific
Installation Instructions for the various mounting
options for MRS.
Chapter 10 - Maintenance
This Chapter describes how to perform periodic
inspection, service and repair to the rail system.
1. How to use this handbook
To Next Page
Loading...
