Page 86 of 110
Rev. G
Section 12: ACI eRCM™ Express Configuration
Monico has partnered with ACI to provide the hardware for running eRCM Express™
Compressor Modeling software. This program communicates with a PLC and runs the
modeling software using compressor and engine data. mCore communicates with the
PLCs either over Modbus TCP or using our AB Tag Client to speak directly to an Allen
Bradley PLC using Tag Arrays.
Section 12.1: Adding License File
1. Find the ACI Configuration section in the left-hand menu. Click License File. The
following screen will appear. This screen will tell you if a license file is installed,
what the name of the file is if one is installed, and whether it matches the MAC
address of the mCore. The License files are unique per mCore and cannot be
used in other mCores.
To Next Page
Loading...