Monico mCore SDR - Section 10.1: Function Table

To Next Page

To Previous Page

Page 80 of 110

Rev. G

Section 10.1: Function Table

Label Function

Multiplier/Offset (m*Tag1) + o Bitwise AND (Constant) Tag1 & k

Reverse Multiplier/Offset (Tag1 – o) / m Bitwise AND (Tag) Tag1 & Tag2

Addition (Constant) Tag1 + k Bitwise OR (Constant) Tag1 | k

Addition (Tag) Tag1 + Tag2 Bitwise OR (Tag) Tag1 | Tag2

Subtraction (Constant) Tag1 - k Bitwise XOR (Constant) Tag1 ^ k

Subtraction (Tag) Tag1 - Tag2 Bitwise XOR (Tag) Tag1 ^ Tag2

Find Percentage (Constant) Tag1 / k * 100 Bitwise Shift Left (Constant) Tag1 << k

Find Percentage (Tag) Tag1/Tag2 * 100 Bitwise Shift Left (Tag) Tag1 << Tag2

Take Percentage (Constant) Tag1 * k / 100 Bitwise Shift Right (Constant) Tag1 >> k

Take Percentage (Tag) Tag1 * Tag2 /100 Bitwise Shift Right (Tag) Tag1 >> Tag2

Remainder (Constant) Tag1 % k Reverse Bits n/a

Remainder (Tag) Tag1 % Tag2 Reverse Bytes n/a

Greater Than (Constant) Tag1 > k Reverse Words n/a

Greater Than (Tag) Tag1 > Tag2

Greater Than or Equal (Constant) Tag1 >= k

Greater Than or Equal (Tag) Tag1 >= Tag2

Less Than (Constant) Tag1 < k

Less Than (Tag) Tag1 < Tag2

Less Than or Equal (Constant) Tag1 <= k

Less Than or Equal (Tag) Tag1 <= Tag2

Data Match (Constant) Tag1 = k

Data Match (Tag) Tag1 = Tag2

Data Mismatch (Constant) Tag1 != k

Data Mismatch (Tag) Tag1 != Tag2

Logical Inverse (NOT) ! Tag1

Logical AND (Tag) Tag1 && Tag2

Logical OR (Tag) Tag1 || Tag2

Invert Bits ~ Tag1