SECTION ONE – DESCRIPTION
DS2000 USER’S MANUAL (rev.C)
1.4
1.4.2 CLIMATIC CONDITIONS
1.4.2.1 AMBIENT TEMPERATURE
0°C to +40°C (exceeding EN 60204-1:1997, par.4.4.3).
1.4.2.2 AMBIENT HUMIDITY
5% to 85% with no condensation and no formation of ice (according to EN 50178:1997,
weather protected site).
1.4.2.3 ALTITUDE
The electrical equipment is able to operating correctly at altitudes up to 1000m above sea
level (according to EN 60204-1:1997, par.4.4.5)
1.4.2.4 TRANSPORTATION AND STORAGE
The electrical equipment withstands the effects of transportation and storage
temperatures within a range of –25°C to +55°C and for short periods not exceeding 24 h
at up to +70°C (according to EN 60204-1:1997, par.4.5).
1.4.2.5 POLLUTION
The equipment has been designed according to pollution degree 2, where normally only
non-conductive pollution occurs. Occasionally, however, a temporary conductivity caused
by condensation is to be expected, when the electronic equipment is out of operation.
1.4.3 OTHER MECHANICAL SPECIFICATIONS
1.4.3.1 IMMUNITY TO MECHANICAL VIBRATION
0.075mm amplitude from 10 Hz to 57 Hz, 1g acceleration from 57 Hz to 150 Hz
(according to EN 50178:1997 and to IEC 68-2-6:1995, Fc test).
To Next Page
Loading...
Need help?
General
