Mooltipass Mini BLE - E) Advanced Settings

To Next Page

To Previous Page

Mooltipass Mini BLE User Manual – 2021/08/25

e) Advanced Settings – Lock Unlock Feature

With the lock unlock feature you can make your Mooltipass:

- unlock your computer when you unlock your device

- lock your computer when your smartcard is removed from the Mooltipass

Simply use the drop-down list to specify whether a login and/or password should be sent after

unlocking your smartcard. The Mooltipass Mini BLE will then the credential for the ‘_unlock_’ service

in your database. For help setting up the ‘_unlock_’ service, please refer to Credentials Tab – Adding

or Updating a Credential.

Password Only

Sends the password stored inside your ‘_unlock_’ service, after

unlocking your smartcard.

Sends the login and password stored inside your ‘_unlock_’ service,

after unlocking your smartcard.

Enter + Password

Simulates an Enter key press then sends the password stored

inside the ‘_unlock_’ service, after unlocking your smartcard.

Note that if the Mooltipass is set to prompt you for confirmation before sending credentials, it

will do that here, too: the key presses are sent when you accept the credential send request.

You can also simulate a Win + L key press, locking your computer, every time the smartcard is

removed from the Mooltipass.

Password / Win + L

Sends the password for the ‘_unlock_’ service,

after unlocking your smartcard

and

Sends a Win + L key press when your smartcard is removed from

the Mooltipass.

Sends the login and password for the ‘_unlock_’ service, after

unlocking your smartcard

and

Sends a Win + L key press when your smartcard is removed from

the Mooltipass.

Enter + Pass / Win + L

Sends an Enter key press then sends the password for the

‘_unlock_’ service, after unlocking your smartcard

and

Sends a Win + L key press when your smartcard is removed from

the Mooltipass.

Finally, choose the Disabled option if you want to deactivate the Lock/Unlock Feature.

Please keep in mind that Moolticute automatically informs the Mini BLE of your computer session

locked state, so you do not get unnecessarily prompted to type your _unlock_ credentials when your

computer session is not locked.

Mooltipass Mini BLE - E) Advanced Settings - Lock Unlock Feature