Motorola A1000 - Searching Contacts and Copying Details

76
D
r
a
f
t
Getting More Out of Your
Communicator
Configuring the Settings
When you have your account information, you can
configure the communicator for remote synchronization.
Action
1 Tap ( ).
2 Tap Edit > Settings .
3 Enter the Server address , Username , and Password .
4 Tap Done .
5 Tap on a task you want to enable.
6 Tap Enable task checkbox.
7 Enter the path to the Server database .
8 Tap Done .
9 Tap Edit > Settings , then tap the Protocol tab.
10 Tap Use transporter login checkbox.
11 Enter a Username and Password .
12 Tap Done .