Disassembly/Reassembly Procedures: Radio Reassembly 7-21
7.6.2 Reassemble the Secondary Shield Assembly (31)
1. With the Main Board (32) assembled, place the Secondary Shield Assembly (31) onto the
Main Board.
Figure 7-28. Assemble the Secondary Shield Assembly
2. Torque all seven Chassis Screws (29) with a Torx IP6 Bit and a Torque Driver to 3.0 in-lbf in
the sequence as shown in Figure 7-29.
Figure 7-29. Torque in the Chassis Screws
To Next Page
Loading...
