Motorola APX 1000 - Page 461

Disassembly/Reassembly Procedures: Radio Reassembly 8-27
8.6.2 Reassemble the Secondary Shield Assembly (44)
1. With the Main Board (45) assembled, place the Secondary Shield Assembly (44) onto the
Main Board.
Figure 8-35. Assemble the Secondary Shield Assembly
2. Torque all seven Chassis Screws (42) with a Torx IP6 Bit and a Torque Driver to 3.0 in-lbf in
the sequence as shown in Figure 8-36.
Figure 8-36. Torque in the Chassis Screws\
Secondary
Shield’s
Dimples
6
1
2
4
3
7
5