Disassembly/Reassembly Procedures: Radio Reassembly 8-35
8.6.11 Reassemble the Antenna (40)
1. With the radio turned off, turn the antenna clockwise to attach it to the radio.
Figure 8-50. Attaching the Antenna
8.6.12 Reassemble the Vacuum Port Seal (56), Ventilation Label (57) and Bottom
Label (39)
1. Adhere and gently press the new Vacuum Port Seal (56) on the chassis’ recess as shown in
Figure 8-51. Press the new Vacuum Port Seal (56) for 30 seconds.
Figure 8-51. Assemble the Vacuum Port Seal
2. With the Vacuum Port Seal assembled, adhere the new Ventilation Label (57) on the chassis’
recess as shown in Figure 8-53. Press the new Ventilation Label (Port Seal area) (57) for 10
seconds.
To Next Page
Loading...
