NEXT > < PREV CONTENTS
ADVANCED FEATURES
(continued)
102
Procedure:
1. Press the Menu Select button directly below Intc to activate the intercom feature of any of the control
heads.
2. Press the PTT button to initiate an intercom transmission.
All control heads that are attached will receive the same intercom call.
The display of the control heads receiving the intercom call shows the alias/ID number of the transmitting
control head.
3. Press the Menu Select button directly below Exit to deactivate the intercom feature.
OR
Press the Home button to deactivate the intercom feature.
The intercom feature also deactivates when user initiates a mode change.
If the radio is on an emergency channel, pressing of the Emergency button or the Emergency Footswitch
button on any control head also deactivates the intercom feature.
To Next Page
Loading...
