NEXT > < PREV CONTENTS
ADVANCED FEATURES
Emergency Operation
Special Considerations for Emergencies
131
• If you press the Emergency button while in a channel that has no emergency capability, a low-pitched tone
sounds.
• If you change to a channel/mode with no Emergency capability while in Emergency operation, the following
occurs:
– The display shows NO EMERGENCY.
– A continuous low-pitched tone sounds until you select a valid Emergency channel/mode or until you
disable the Emergency operation.
• If you change to a channel/mode with Emergency capability while in Emergency operation, the Emergency
Alarm and/or Emergency Call continues on the new channel/mode.
• If the radio is out-of-range of the system or the emergency alarm is not acknowledged, a tone sounds and
the display shows No acknowledge.
To Next Page
Loading...
