Motorola APX 8500 - Deleting a Channel in the Dynamic Zone

NEXT > < PREV CONTENTS
ADVANCED FEATURES
Dynamic Zone Programming (DZP)
Deleting a Channel in the Dynamic Zone
98
To perform this operation, the radio must be in the Dynamic Zone.
Procedure:
1. From the home screen, scroll left or right to ZnPr.
2. Press the Menu Select button directly below ZnPr to enter Program Zone screen.
The display shows the dynamic channels list.
3. Scroll up or down to the saved dynamic channel.
4. Press the Menu Select button directly below Del.
The display shows Channel deleted.
5. Press the Menu Select button directly below Exit to return to home screen.
The home screen shows <Dynamic Zone Channels>.
OR
The home screen shows <Zone Name> “Blank” if the channel deleted is the home channel.