Motorola APX 8500 - Turning Scan on or off

NEXT > < PREV CONTENTS
ADVANCED FEATURES
This feature allows you to monitor traffic on different
channels by scanning a preprogrammed list of
channels. Scanning is halted if you initiate a call and
resumes when the call has ended.
Procedure:
[Preprogrammed Button]
Press the preprogrammed Scan button to initiate or
stop scan.
If the scan is enabled, the display shows Scan On
and the scan status icon.
OR
If the scan is disabled, the display shows Scan Off.
Scan
Turning Scan On or Off
118
OR
[Menu]
1. From the home screen, scroll left or right to
Scan.
2. Press the Menu Select button directly below
Scan.
If the scan is enabled, the display shows Scan
On and the scan status icon.
OR
If the scan is disabled, the display shows Scan
Off.
The radio returns to the home screen.