NEXT > < PREV CONTENTS
GETTING STARTED
Identifying Status Indicators
Alert Tones
60
Your radio uses alert tones to inform you of your radio’s condition. The following table lists these tones and
when they occur.
You Hear Tone Name Heard
Two
high-pitched
tones
Private Conversation When a private call is received.
Four high-
pitched tones
every five
seconds
Call Alert When a Call Alert page is received.
Single high-
pitched tone
Central Acknowledge
When the central controller of the system receives the Call Alert, emergency alarm,
reprogram request, or status/message transmission.
Four high-
pitched tones
Mobile Unit Acknowledge
When a Call Alert page is received by the intended unit, or the emergency alarm,
reprogram request, or status/message transmission is acknowledged by the intended
dispatcher.
Sound similar
to a telephone
busy signal
System Busy
When the PTT button is pressed, indicates transmission fail because all system radio
channels are in use. Release the PTT button and wait for callback.
To Next Page
Loading...
