NEXT > < PREV CONTENTS
GETTING STARTED
Preparing Your Radio for Use
Turning On/Off the Radio
32
Procedure:
1. Press and hold the Power Button to power on the radio.
After a short time, the red, yellow, and green LEDs light
up. The display then shows the following:
• Current zone and channel text
• Codeplug Alias
• Menu items on the home screen
Codeplug Alias feature is enabled through Customer
Programming Software (CPS) configuration to display the
codeplug alias as a temporary text during power on. The
backlight turns on to the last selected dim level.
2. To turn off the radio, press the Power Button after the
LEDs light up.
Note: The duration that user must press and hold the Power
Button to turn off the radio is programmable by a qualified
radio technician.
Power
Button
To Next Page
Loading...
