NEXT > < PREV CONTENTS
GENERAL RADIO OPERATION
Selecting a Zone
64
A zone is a group of channels. Do one of the
following to select a radio channel. You can use
these options interchangeably depending on your
preference and the programmed functions.
Procedure:
[Mode Knob]
If zone is set as the primary mode,
1. Turn the Mode Knob until the display shows the
desired zone.
2. Press the PTT button to transmit on the displayed
zone.
If zone is not set as the primary mode, press the
Mode Knob once and repeat step 1.
OR
[Menu]
1. From the home screen, scroll left or right to
Zone.
2. Press the Menu Select button directly below
Zone.
3. Scroll up or down to the required zone or use the
keypad to enter the zone number.
4. Press the Menu Select button directly below Sel
to confirm the displayed zone.
5. Press the PTT button to transmit on the displayed
zone channel.
DEMO
To Next Page
Loading...
