Motorola APX 8500 - Checking the Wi-Fi Configuration and Status of the Radio

NEXT > < PREV CONTENTS
ADVANCED FEATURES
Wi-Fi
Checking the Wi-Fi Configuration and Status of the Radio
238
Procedure:
[Preprogrammed Button]
Long press the preprogrammed Wi-Fi button.
The display shows the current status of the Wi-Fi as
described in the following table.
OR
[Menu]
1. From the home screen, scroll left or right to
WiFi.
2. Press the Menu Select button directly below
WiFi.
The display shows the current status of the Wi-Fi
as described in the following table.
If the radio is Wi-Fi connected, you see a Wi-Fi
signal strength indicator on the front display.
In addition, the Wi-Fi menu shows Connected
under the connection Status heading, what
network you are connected to under the Network
heading, and the signal strength to that network
under the Sig Strength heading.
3. Press the Home button to exit.
Searching
Looking for available Wi-Fi
networks that have been
preprogrammed into the radio.
Connecting
In the process of connecting to a
found Wi-Fi network.
Connected
Connected to one of the
preprogrammed Wi-Fi networks.
No Service
No available networks or
connection with one of the
networks failed.