NEXT > < PREV CONTENTS
ADVANCED FEATURES
Scan
Changing Priorities Status While Scan is On
122
While the radio is scanning, the dynamic priority change feature allows you to temporarily change any channel
in a scan list (except for the Priority-One channel) to the Priority-Two channel.
This change remains in effect until scan is turned off. Scan then reverts to the preprogrammed (original)
setting.
Procedure:
1. Press the Menu Select button directly below DYNP to change the priority of a non-priority channel in the
scan list to Priority-Two.
2. Press the Home button momentarily to exit the scan list and resume scanning.
To Next Page
Loading...
