NEXT > < PREV CONTENTS
ADVANCED FEATURES
Radio Stun and Kill
Radio Stun
This feature allows you to stun another radio by
sending an over-the-air command using the menu on
your radio. This feature prevents an unauthorized
user from using the radio. Once the radio is stunned,
a password is required to re-activate the stunned
radio.
Procedure:
1. From the home screen, scroll left or right to
Stun.
2. Press the Menu Select button directly below
Stun.
The display shows Enter Password.
3. Use the keypad to enter your Tactical Inhibit
Encode Password.
4. Press the Menu Select button directly below OK.
The display shows radio Contact IDs.
5. Perform one of the following:
– Scroll up or down to the required ID.
– Press the Menu Select button directly below
LNum to go to the last number dialed.
– Use the keypad to enter the required ID.
– Press the Menu Select button directly below
Send to initiate command.
If the receiving radio received the command,
your radio display shows Ack received.
If the receiving radio does not have encryption
key to decrypt the received encrypted command,
your radio display shows Decrypt failed.
If the receiving radio is powered off or already
killed, your radio display shows No Ack.
Once the receiving radio received the command, the
screen is locked and it will request for a password.
183
To Next Page
Loading...
