Motorola APX 8500 - Sending a Quick Text Message

NEXT > < PREV CONTENTS
ADVANCED FEATURES
Text Messaging Service (TMS)
Sending a Quick Text Message
153
Quick Text messages are messages that are
predefined and usually consist of messages that are
used most frequently.
Each Quick Text message has a maximum length of
50 characters.
Procedure:
[Preprogrammed Button]
1. To access this feature using the preprogrammed
button, press the preprogrammed Quick Text
button
2. Scroll up or down to scroll through the list of
messages and press the Menu Select button
directly below Sel to select the required message.
The message appears on the Compose screen,
with a blinking cursor at the end of ti. Use the
keypad to edit the message, if required.
3. Press the Menu Select button directly below
Optn.
4. Scroll up or down to Send Message and press
the Menu Select button directly below Sel.
5. Scroll up or down through the address list and
select the required address. The message is sent
after the address is selected.
OR
Scroll up or down to [Other Recpnt] and press
the Menu Select button below Edit. When a
blinking cursor appears in the Enter Address
screen, use the keypad to type the address entry.
6. Press the Menu Select button directly below
Send or press the PTT button to send the
message.