NEXT > < PREV CONTENTS
UTILITIES
External Alarms (Horn and Lights)
257
Your service administrator may configure the control
heads with external alarms (horn and lights) that are
activated when a Call Alert Page, Private Call, or
Phone Call is received. The radio always powers up
with the horn and lights feature enabled.
Using Non-Permanent Horn and Lights
Procedure:
1. Press the Menu Select button directly below H/L
momentarily.
The last selected alarm(s) are enabled, and the
display shows the enabled alarm(s) alternating
with the selected mode, until it is turned off.
2. Press the Menu Select button directly below H/L
momentarily to turn off the alarm(s).
The display shows Horn/Lites off.
To Next Page
Loading...
