NEXT > < PREV CONTENTS
ADVANCED FEATURES
(continued)
185
If the receiving radio receives the command, the
radio display shows Ack received.
If the receiving radio does not have encryption
key to decrypt the received encrypted command,
your radio display shows Decrypt failed.
If the receiving radio is powered off or already
killed, your radio display shows No Ack.
Once the receiving radio received the command, the
screen turns blank, and the killed radio is inoperable.
Using Direct Kill to Kill Your Own Radio
Direct Kill allows you to make your own radio
inoperable.
Procedure:
Press and hold the Programmable Button (2-dot)
on the keypad microphone then press the Orange
button until the display turns blank and becomes
inoperable.
To Next Page
Loading...
