Motorola CDM Series - Transceiver Board Removal

Maintenance 2-5
3. Lift the top cover from the chassis.
Figure 2-3: Top Cover Removal
2.6.3 Transceiver Board Removal
1. Remove six screws (nine for LowBand) from the diecast cover using the T20 TORX™ driver as
shown in Figure 2-4.
2. Lift the cover from the chassis.
Figure 2-4: Diecast Cover Removal
Dismantling
Tool
Diecast
Cover
Screws (6 or 9)
Radio
Chassis