Motorola CDM Series Basic Service Manual

5-4 Power Up Self-Test
5.4 CPS/PPCPS Programming Setup
The CPS/PPCPS programming setup, shown in Figure 5-1:, is used to program the radio codeplug.
Note: Refer to appropriate program on-line help files for the codeplug programming procedures.
Figure 5-1: CPS/PPCPS Programming Setup
RIB
RLN4008
RIB Power Supply
Rx
Gnd
Data
Tx Data
Radio
Computer Interface
Cable
Program
HKN9217
Cable
3080369B72
DB15
DB9
120/230 Vac
Power
Supply
+12VDC
NOTE: Ribless Programming Cable
is part number RKN4075

Motorola CDM Series Specifications

General

Brand	Motorola
Model	CDM Series
Category	Two-Way Radio
Language	English