4-1
Chapter 4
Radio Programming and Tuning Procedures
4.1 Introduction
This chapter provides an overview of the Customer Programming Software (CPS) and tuner program
designed for use in a Windows 95/98/NT environment. An installation instruction manual is also
included with each kit.
Table 4-1: Software Installation Kit Radio Tuning Setup
4.2 CPS Programming Setup
The CPS programming setups, shown in Figure 4-1 through Figure 4-3, are used to program the
radio.
Description Kit Number
Customer Programming Software (CPS
+
) CD
Includes CPS and PPCPS
HVN9025_
Note:
Refer to the appropriate program on-line help files for detailed programming proce-
dures.
Figure 4-1: CPS Programming Setup with RIB
RIB
RLN-4008
Rx
Gnd
Data
Tx Data
Cable 3080369B72 (9 PIN)
DB15
Cable 3080369B71 (25 PIN)
Power
Supply
+13,2VDC
Programming
AARKN4081
Cable
DB25
Radio
DC
RF
ACC
ZWG0130338-0
To Next Page
Loading...
Need help?
General
