10 - 8 Symbol LS3408 Product Reference Guide
Transmission Timeout
The Scanner Emulation host transmits bar code data to the connected decoder and waits for the decoder to assert
the decode signal, indicating successful transmission. If, after a specified amount of time, the decode signal is not
asserted (indicating that the decoder did not receive the bar code data), the scanner issues transmit error beeps.
Scan the appropriate bar code below to select the desired transmission timeout.
*3 Second Transmission Timeout
4 Second Transmission Timeout
5 Second Transmission Timeout
10 Second Transmission Timeout
30 Second Transmission Timeout
To Next Page
Loading...
