13 - 4 Symbol LS3408 Product Reference Guide
Scan Angle
The scanner supports two scan angles. This parameter provides two options for the length of the laser scanning
beam. Use the bar codes below to change scan angles.
*Normal Angle
Alternate Angle
Prefix/Suffix Values
You can append a prefix/suffix to scan data for use in data editing. To set these values, scan a four-digit number
(i.e., four bar codes) that corresponds to key codes for various terminals. For conversion information, see the
ASCII Character Set tables in the appropriate host chapter. See Appendix D, Numeric Bar Codes for numeric bar
codes. In case of an error, or to change the selection, scan Cancel on page D-3.
Scan Prefix
Scan Suffix
To Next Page
Loading...
