Chapter 13 Miscellaneous Scanner Options
Introduction
This chapter includes features frequently used to customize how data transmits to the host device. In addition to
these bar codes for data formatting, see each host chapter for the appropriate host connections and host device
features for the scanner. See Chapter 12, Symbologies and Chapter 14, Advanced Data Formatting for
customizing data for transmission to the host device.
Before programming, follow the instructions in Chapter 1, Getting Started.
The scanner ships with the settings shown in the Miscellaneous Scanner Options Default Table on page 13-2 (also
see Appendix A, Standard Default Parameters for all host device and miscellaneous scanner defaults). If the
default values suit requirements, programming is not necessary. Set feature values by scanning single bar codes
or short bar code sequences.
Scanning Sequence Examples
In most cases, scan only one bar code to set a specific parameter value.
Parameters such as Prefix Value require scanning several bar codes in the proper sequence. See each individual
parameter for descriptions of this procedure.
Errors While Scanning
Unless otherwise specified, to correct an error during a scanning sequence, re-scan the correct parameter.
To Next Page
Loading...
