Symbologies 12 - 25
Code 93
Enable/Disable Code 93
To enable or disable Code 93, scan the appropriate bar code below.
Enable Code 93
*Disable Code 93
Set Lengths for Code 93
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for Code 93 for any length, one or two discrete lengths, or lengths within a specific
range.
One Discrete Length - Select this option to decode only Code 93 symbols containing a selected length. Select the
length using the numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decode only Code 93
symbols with 14 characters, scan Code 93 - One Discrete Length, then scan 1 followed by 4. In case of an error,
or to change the selection, scan Cancel on page D-3.
Code 93 - One Discrete Length
To Next Page
Loading...
