5 - 10 Symbol LS3408 Product Reference Guide
Function Key Mapping
ASCII values under 32 are normally sent as control key sequences (see Table 5-2 on page 5-13). Enable this
parameter to send the keys in bold in place of the standard key mapping. Table entries that do not have a bold
entry remain the same whether or not you enable this parameter.
Enable Function Key Mapping
*Disable Function Key Mapping
FN1 Substitution
Enable this to replace any FN1 characters in an EAN128 bar code with a user-selected keystroke. See FN1
Substitution Values on page 13-7.
Enable FN1 Substitution
*Disable FN1 Substitution
Send Make and Break
Enable this to prevent sending the scan codes for releasing a key.
*Send Make and Break Scan Codes
Send Make Scan Code Only
To Next Page
Loading...
