12 - 38 Symbol LS3408 Product Reference Guide
Set Lengths for Codabar (continued)
Length Within Range - Select this option to decode a Codabar symbol within a specific length range. Select
lengths using the numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decode Codabar
symbols containing between 4 and 12 characters, first scan Codabar - Length Within Range. Then scan 0, 4, 1,
and 2 (enter a leading zero for single digit numbers). In case of an error, or to change the selection, scan Cancel
on page D-3.
Codabar - Length Within Range
Any Length - Select this option to decode Codabar symbols containing any number of characters within the
scanner capability.
Codabar - Any Length
To Next Page
Loading...
