Motorola RFS6000 User Manual

Motorola RF Switch CLI Reference Guide
5-2
5.1 Global Configuration Commands
Table 5.1 summarizes the Global Config commands
Table 5.1 Global Config Mode Command Summary
Command Description Ref.
aaa Configures the current authentication, authorization
and accounting (aaa) login settings
page 5-5
access-list Adds an access list entry page 5-7
autoinstall Autoinstalls a configuration command page 5-14
banner Defines a login banner page 5-16
boot Reboots the switch page 5-17
bridge Displays bridge group commands page 5-18
clrscr Clears the display screen page 2-2
country-code Configures the country of operation. All existing
radio configuration will be erased
page 5-21
crypto Defines encryption parameters page 5-22
do Runs commands from the EXEC mode page 5-38
end Ends the current mode and moves to the EXEC mode page 5-39
errdisable Recovers from errors page 5-40
exit Ends the current mode and moves to the previous
mode
page 2-3
ftp Configures FTP server parameters page 5-41
help Describes the interactive help system page 2-4
hostname Sets the system's network name page 5-43
interface Defines an interface to configure page 5-44
ip Internet Protocol (IP) page 5-46

Motorola RFS6000 Specifications

General

Model	RFS6000
Category	Network Router
Frequency Bands	2.4 GHz, 5 GHz
Max Data Rate	300 Mbps
Power over Ethernet (PoE)	Yes
Mounting Options	Rack-mountable
Authentication Method	RADIUS, LDAP, Active Directory
Wireless Standards	802.11a/b/g/n
Security Features	WPA, WPA2, 802.1x
Data Link Protocol	Ethernet, Fast Ethernet, Gigabit Ethernet
Network/Transport Protocol	TCP/IP, UDP
Compliant Standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Encryption Algorithm	AES, TKIP
Remote Management Protocol	SNMP, HTTP, HTTPS, SSH, Telnet
Features	VLAN support, Quality of Service (QoS), Rogue AP detection
Management Interface	Web-based, CLI