Motorola RFS6000 User Manual

Motorola RF Switch CLI Reference Guide
20-52
20.1.32 mobile-unit
 Wireless Configuration Commands
Configures mobile unit related parameters
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
mobile-unit [association-history|probe-history]
mobile-unit association-history [enable|clear]
mobile-unit probe-history [enable|add <1-200> <MAC>]
Parameters
Example
RFSwitch(config-wireless)#mobile-unit probe-history enable
RFSwitch(config-wireless)#mobile-unit association-history
enable
RFSwitch(config-wireless)#mobile-unit probe-history add 20
AA-BB-CC-DD-EE-FF
RFSwitch(config-wireless)#
association-history
[enable|clear]
Enables a mobile unit’s association history.
• enable – Enables a mobile unit’s association history
• clear – Clears the association history for all mobile units
probe-history
[enable|add <1-200>
<MAC>
Mobile unit probe logging configuration commands.
• enable – Enables a mobile unit’s probe logging feature
• add <1-200> <MAC>– Adds a mobile unit to probe
history logging
• <1-200> – Select an index value between 1 and 200 to
add probe logging MAC.
• <MAC> – Sets the MAC address of the mobile used
for probe history logging

Motorola RFS6000 Specifications

General

Model	RFS6000
Category	Network Router
Frequency Bands	2.4 GHz, 5 GHz
Max Data Rate	300 Mbps
Power over Ethernet (PoE)	Yes
Mounting Options	Rack-mountable
Authentication Method	RADIUS, LDAP, Active Directory
Wireless Standards	802.11a/b/g/n
Security Features	WPA, WPA2, 802.1x
Data Link Protocol	Ethernet, Fast Ethernet, Gigabit Ethernet
Network/Transport Protocol	TCP/IP, UDP
Compliant Standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Encryption Algorithm	AES, TKIP
Remote Management Protocol	SNMP, HTTP, HTTPS, SSH, Telnet
Features	VLAN support, Quality of Service (QoS), Rogue AP detection
Management Interface	Web-based, CLI