Motorola RFS6000 - Deny

Motorola RF Switch CLI Reference Guide
14-4
14.1.2 deny
 Extended ACL Config Commands
Specifies packets to reject
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
deny [icmp|ip|tcp|upd|proto]
deny icmp [<source-IP/Mask>|any|host <IP>] [<dest-IP/
Mask>|any|host <IP>] {<ICMP-type> {<ICMP-code>}} {log}
{rule-precedence <1-5000>}
deny ip [<source-IP/Mask>|any|host <IP>] [<dest-IP/
Mask>|any|host <IP>] {log} {rule-precedence <1-5000>}
deny [tcp|udp] [<source-IP/Mask>|any|host <IP>] {eq
<source-port>|range <starting-source-port>
<ending-source-port>} [<dest-IP/Mask|any|host <IP>]
{eq <source-port>} {range <starting-source-port>
<ending-source-port>} {log} {rule-precedence <1-5000>}
deny proto [<1-254>|WORD|eigrp|gre|
igmp|igp|ospf|vrrp][<source-IP/Mask>|any|host <IP>]
[<dest-IP/Mask>|any|host <IP>] {log} {rule-description
<WORD>|rule-precedence<1-5000>}