Motorola RFS6000 - Dot11 K

Motorola RF Switch CLI Reference Guide
20-132
20.1.52 dot11k
 Wireless Configuration Commands
Displays dot11k related commands
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
dot11k send-beacon-req [<1-8192>|MU|mu]
dot11k send-beacon-req <1-8192> measurement-duration
<100-10000>
dot11k send-beacon-req [mu|MU] <MAC> measurement-duration
<100-10000>
Parameters
Example
RFSwitch(config-wireless)#dot11k send-beacon-req 9
measurement-duration 777
RFSwitch(config-wireless)#
dot11k send-beacon-req
[<1-8192>|MU|mu]
Triggers the Beacon request send
• <1-8192> – A single MU index
• MU – A list (eg: 1,3,7) or range (eg: 3-7) of MU indices
• mu – Mobile-units MAC address
• MAC – Mac address in AA-BB-CC-DD-EE-FF format
• measurement-duration <100-10000> – Specifies
measurement duration in TUs
• <100-10000> – Specifies range of measurement
duration