Motorola RFS6000 - Nas-ID

Motorola RF Switch CLI Reference Guide
20-56
20.1.36 nas-id
 Wireless Configuration Commands
Configures the NAS ID to be sent to the RADIUS server
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
nas-id <nas-id>
To override nas-id on a per WLAN basis:
wlan <1-4098> nas-id <nas-id>
Parameters
Example
RFSwitch(config-wireless)#nas-id WIRELESSWELL
RFSwitch(config-wireless)#
RFSwitch(config-wireless)#wlan 1 nas-id WIRELESSWELL1
<nas-id>
A character string to be used as the NAS ID. Can be up to
256 characters long.