Motorola RFS6000 - Chapter 14. Extended ACL Instance; Extended ACL Config Commands

Extended ACL Instance
The Extended ACL instance (config-ext-nacl) is used to manage the extended
Access Control List entries associated with the switch.
To navigate to this instance, use the command
RFSwitch(config)#ip access-list extended [<ACL-name>|
<100-199>|<2000-2699>]
RFSwitch(config-ext-nacl)#
14.1 Extended ACL Config Commands
Table 14.1 summarizes config-ext-nacl commands:
Table 14.1 Extended ACL Config Command Summary
Command Description Ref.
clrscr Clears the display screen page 14-3
deny Specifies packets to reject page 14-4
exit Ends the current mode and moves to the previous
mode
page 14-13
help Displays the interactive help system page 14-14
mark Specifies packets to mark page 14-15
no Negates a command or sets its defaults page 14-21