Motorola RFS6000 User Manual

Motorola RF Switch CLI Reference Guide
viii
The syntax, parameters and descriptions within this guide can also be used generically for
a RFS6000 and RFS7000 model switch. However, some subtle differences do exist
amongst these baselines. These differences are strongly noted within the specific
commands impacted. When these differences are noted, the options available to each
switch baseline are described in detail.
How to Use this Guide
This guide will help you implement, configure, and administer the switch and associated
network elements. This guide is organized into the following sections:
Chapter Jump to this section if you want to...
Chapter 1, “Introduction” Review the overall feature-set of the switch, as well as
the many configuration options available.
Chapter 2, “Common
Commands”
Understand the commands common amongst many
contexts and instance contexts within the switch CLI.
Chapter 3, “User Exec
Commands”
Summarize the User Exec commands within the
switch CLI.
Chapter 4, “Privileged Exec
Commands”
Review the Priv Exec commands within the switch CLI.
Chapter 5, “Global
Configuration Commands”
Understand the Global Config commands within the
switch CLI.
Chapter 6, “Crypto-isakmp
Instance”
Review the (
crypto-isakmp) commands within the
switch CLI.
Chapter 7, “Crypto-group
Instance”
Understand the (
crypto-group) commands within the
switch CLI.
Chapter 8, “Crypto-peer
Instance”
Summarize the (
crypto-peer) commands within the
switch CLI.
Chapter 9, “Crypto-ipsec
Instance”
Review the (
crypto-ipsec) commands within the
switch CLI.

Motorola RFS6000 Specifications

General

Brand	Motorola
Model	RFS6000
Category	Network Router
Language	English