Motorola RFS6000 User Manual

Global Configuration Commands
5-129
5.1.44 wwan
 Global Configuration Commands
Configures wirless wan finterface
Supported in RFS6000 platform only
Syntax
wwan [apn<STRING>|disable|enable|password<STRING>
|username<STRING>]
Parameters
Example
RFS6000(config)#wwan disable
RFS6000(config)#
RFS6000(config)#no wwan apn
RFS6000(config)#
apn <STRING> Enter the access point name provided by the service
provider.
• <STRING> – A string of up to 25 characters
disable Disables the wireless wan feature
enable Enables the wireless wan feature
password <STRING> Enter password provided by the service provider
• <STRING> – A string of up to 30 characters
username <STRING> Enter username provided by the service provider
• <STRING> – A string of up to 32 characters

Motorola RFS6000 Specifications

General

Model	RFS6000
Category	Network Router
Frequency Bands	2.4 GHz, 5 GHz
Max Data Rate	300 Mbps
Power over Ethernet (PoE)	Yes
Mounting Options	Rack-mountable
Authentication Method	RADIUS, LDAP, Active Directory
Wireless Standards	802.11a/b/g/n
Security Features	WPA, WPA2, 802.1x
Data Link Protocol	Ethernet, Fast Ethernet, Gigabit Ethernet
Network/Transport Protocol	TCP/IP, UDP
Compliant Standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Encryption Algorithm	AES, TKIP
Remote Management Protocol	SNMP, HTTP, HTTPS, SSH, Telnet
Features	VLAN support, Quality of Service (QoS), Rogue AP detection
Management Interface	Web-based, CLI