Motorola RFS6000 - Sole

Motorola RF Switch CLI Reference Guide
21-26
21.1.15 sole
 RTLS Config Commands
Sets Smart Opportunistic Location Engine (SOLE) related configuration commands
This command leads you to the
(config-rtls-sole)# sub-instance.
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
sole
Parameters
None
Example
RFSwitch(config-rtls)#sole
RFSwitch(config-rtls-sole)#
NOTE: sole command instantiates (config-rtls-sole)
sub-instance.
For more details see SOLE Instance on page 24-1.
The prompt changes from
RFSwitch(config-rtls)# to
RFSwitch(config-rtls-sole)