Motorola RFS6000 - Ldap-Server

Motorola RF Switch CLI Reference Guide
19-24
19.1.9 ldap-server
 Radius Configuration Commands
Sets the LDAP server configuration
It uses the existing external database (active directory with the onboard RADIUS server)
instead of the local database on the switch.
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
ldap-server [primary|secondary] host <IP>
ldap-server primary host <IP> port <1-65535>
login <user-name> bind-dn <distinguished-name> base-dn
<distinguished-name> passwd {<password>|<password>
|<password>} passwd-attr <password-attribute>
group-attr <group-attribute> group-filter
<group-filter> group-membership <group> net-timeout <1-10>
ldap-server secondary host <IP> port <1-65535> login <user-
name> bind-dn <distinguished-name> base-dn <distinguished-
name> passwd {<password>|<password>|
<password>} passwd-attr <password-attribute>
group-attr <group-attribute> group-filter <group-filter>
group-membership <group> net-timeout <1-10>