Motorola RFS6000 User Manual

Standard ACL Instance
The Standard ACL instance (config-std-acl) is used to manage the standard Access
Control List entries associated with the switch.
To navigate to this instance, use the command:
RFSwitch(config)#ip access-list standard [<ACL-name>|
<1-99>|<1300-1999>]
RFSwitch(config-std-acl)#
15.1 Standard ACL Config Commands
Table 15.1 summarizes the config-std-nacl commands:
Table 15.1 Standard ACL Config Command Summary
Command Description Ref.
clrscr Clears the display screen page 15-3
deny Specifies packets to reject page 15-4
end Ends the current mode and moves to the EXEC mode page 15-6
exit Ends the current mode and moves to the previous mode page 15-7
help Displays the interactive help system page 15-8
mark Specifies packets to mark page 15-9
no Negates a command or sets its defaults page 15-11

Motorola RFS6000 Specifications

General

Brand	Motorola
Model	RFS6000
Category	Network Router
Language	English