Motorola RFS6000 User Manual

Motorola RF Switch CLI Reference Guide
17-26
17.1.19 network
 DHCP Config Commands
Sets the network pool’s IP address
This address maps the current DHCP pool with a specific network.
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
network [<IP>|<IP/Mask>]
Parameters
Usage Guidelines
Ensure a VLAN interface (with specific network/subnet) exists on the switch before
mapping a DHCP pool to a particular network.
Example
RFSwitch(config-dhcp)#network 2.2.2.0/24
RFSwitch(config-dhcp)#
network [<IP>|<IP/Mask>] Sets the network number and mask
• <IP> – Network number in dotted decimal
format
• <IP/Mask> – Network number and mask

Motorola RFS6000 Specifications

General

Brand	Motorola
Model	RFS6000
Category	Network Router
Language	English