Motorola RFS6000 User Manual

Motorola RF Switch CLI Reference Guide
20-46
20.1.27 help
 Wireless Configuration Commands
Displays the system’s interactive help (in HTML format)
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
help
Parameters
None
Example
RFSwitch(config-wireless)#help
CLI provides advanced help feature. When you need help,
anytime at the command line please press '?'.
If nothing matches, the help list will be empty and you must
backup until entering a '?' shows the available options.
Two styles of help are provided:
1. Full help is available when you are ready to enter a
command argument (e.g. 'show ?') and describes each possible
argument.
2. Partial help is provided when an abbreviated argument is
entered and you want to know what arguments match the input
(e.g. 'show ve?'.)
RFSwitch(config-wireless)#

Motorola RFS6000 Specifications

General

Model	RFS6000
Category	Network Router
Frequency Bands	2.4 GHz, 5 GHz
Max Data Rate	300 Mbps
Power over Ethernet (PoE)	Yes
Mounting Options	Rack-mountable
Authentication Method	RADIUS, LDAP, Active Directory
Wireless Standards	802.11a/b/g/n
Security Features	WPA, WPA2, 802.1x
Data Link Protocol	Ethernet, Fast Ethernet, Gigabit Ethernet
Network/Transport Protocol	TCP/IP, UDP
Compliant Standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Encryption Algorithm	AES, TKIP
Remote Management Protocol	SNMP, HTTP, HTTPS, SSH, Telnet
Features	VLAN support, Quality of Service (QoS), Rogue AP detection
Management Interface	Web-based, CLI