Motorola RFS6000 - Page 878

Motorola RF Switch CLI Reference Guide
21-18
Parameters
service filter <1-100>
[action|length <1-
128>|mask|
memory-
bank|name|offset<0-32>]
Configures RFID tag filter
• action [allow|deny] – Configures action for tag filter. By
default its configured to allow
• length <1-128> – Configures number of bits to compare
against tag mask
• mask <name> – Configures tag mask for filter
• memory-bank [epc|tid|uid] – Configures tag memory
bank for the filter
• epc – EPC memory bank
• tid – TID memory bank
• uid – UID memory bank
• name <name> – Configures tag filter name
• offset <0-32> – Configures first location of memory bank
against which the tag mask is compared
service inventory <1-100>
[duration <0-100000>|
filter{<1-
100>|<name>}|report
{current|differential}|
round <0-10>|start|
start-trigger|stop-
trigger|zone]
A single tag inventory index
• duration <0-100000> – Inventory period in msecs
• filter [<1-100>|<name>] – Configures the selected tags
filter for inventory
• report – Set tag inventory report type
• current – Reports current tag view
• differential – Reports only the tags changed since
previous report
• round <0-10> – Sets tag inventory round size
• start – Starts tag inventory